dmesg - Best settings
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.1.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-3) ) #1 SMP Debian 4.1.3-1 (2015-08-19)
Command line: BOOT_IMAGE=/vmlinuz-4.1.0-1-amd64 root=/dev/mapper/luca-root ro quiet splash video=HDMI-A-1:1366x768-24@60
tseg: 00bd800000
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x00000000ba532fff] usable
BIOS-e820: [mem 0x00000000ba533000-0x00000000ba966fff] reserved
BIOS-e820: [mem 0x00000000ba967000-0x00000000ba976fff] ACPI data
BIOS-e820: [mem 0x00000000ba977000-0x00000000bb784fff] ACPI NVS
BIOS-e820: [mem 0x00000000bb785000-0x00000000bc9ddfff] reserved
BIOS-e820: [mem 0x00000000bc9de000-0x00000000bca33fff] type 20
BIOS-e820: [mem 0x00000000bca34000-0x00000000bca34fff] usable
BIOS-e820: [mem 0x00000000bca35000-0x00000000bcc3afff] ACPI NVS
BIOS-e820: [mem 0x00000000bcc3b000-0x00000000bd082fff] usable
BIOS-e820: [mem 0x00000000bd083000-0x00000000bd7f3fff] reserved
BIOS-e820: [mem 0x00000000bd7f4000-0x00000000bd7fffff] usable
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100001000-0x000000023effffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.10 by American Megatrends
efi: ACPI=0xba96e000 ACPI 2.0=0xba96e000 SMBIOS=0xf04c0
SMBIOS 2.7 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./SABERTOOTH 990FX R2.0, BIOS 2501 04/08/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x23f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF write-through
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000BD800000 mask FFFFFF800000 uncachable
3 base 0000BE000000 mask FFFFFE000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000023f000000 aka 9200M
PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
e820: update [mem 0xbd800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbd800 max_arch_pfn = 0x400000000
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01d24000, 0x01d24fff] PGTABLE
BRK [0x01d25000, 0x01d25fff] PGTABLE
BRK [0x01d26000, 0x01d26fff] PGTABLE
init_memory_mapping: [mem 0x23ee00000-0x23effffff]
[mem 0x23ee00000-0x23effffff] page 2M
BRK [0x01d27000, 0x01d27fff] PGTABLE
init_memory_mapping: [mem 0x220000000-0x23edfffff]
[mem 0x220000000-0x23edfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x21fffffff]
[mem 0x200000000-0x21fffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xba532fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0x7fffffff] page 1G
[mem 0x80000000-0xba3fffff] page 2M
[mem 0xba400000-0xba532fff] page 4k
init_memory_mapping: [mem 0xbca34000-0xbca34fff]
[mem 0xbca34000-0xbca34fff] page 4k
BRK [0x01d28000, 0x01d28fff] PGTABLE
init_memory_mapping: [mem 0xbcc3b000-0xbd082fff]
[mem 0xbcc3b000-0xbcdfffff] page 4k
[mem 0xbce00000-0xbcffffff] page 2M
[mem 0xbd000000-0xbd082fff] page 4k
BRK [0x01d29000, 0x01d29fff] PGTABLE
init_memory_mapping: [mem 0xbd7f4000-0xbd7fffff]
[mem 0xbd7f4000-0xbd7fffff] page 4k
init_memory_mapping: [mem 0x100001000-0x1ffffffff]
[mem 0x100001000-0x1001fffff] page 4k
[mem 0x100200000-0x13fffffff] page 2M
[mem 0x140000000-0x1ffffffff] page 1G
RAMDISK: [mem 0x34c58000-0x36623fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000BA96E000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000BA96E070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000BA975110 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20150410/tbfadt-649)
ACPI: DSDT 0x00000000BA96E168 006FA8 (v02 ALASKA A M I 00000000 INTL 20051117)
ACPI: FACS 0x00000000BB77FF80 000040
ACPI: APIC 0x00000000BA975220 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000BA9752C0 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000BA975308 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
ACPI: HPET 0x00000000BA975348 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
ACPI: IVRS 0x00000000BA976AF0 0000F8 (v01 AMD RD890S 00202031 AMD 00000000)
ACPI: SSDT 0x00000000BA9753D8 001714 (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023effffff]
NODE_DATA(0) allocated [mem 0x23eff6000-0x23eff9fff]
[ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236600000-ffff88023e5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000023effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x00000000ba532fff]
node 0: [mem 0x00000000bca34000-0x00000000bca34fff]
node 0: [mem 0x00000000bcc3b000-0x00000000bd082fff]
node 0: [mem 0x00000000bd7f4000-0x00000000bd7fffff]
node 0: [mem 0x0000000100001000-0x000000023effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000023effffff]
On node 0 totalpages: 2070822
DMA zone: 64 pages used for memmap
DMA zone: 26 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 11879 pages used for memmap
DMA32 zone: 760200 pages, LIFO batch:31
Normal zone: 20416 pages used for memmap
Normal zone: 1306623 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0xba533000-0xba966fff]
PM: Registered nosave memory: [mem 0xba967000-0xba976fff]
PM: Registered nosave memory: [mem 0xba977000-0xbb784fff]
PM: Registered nosave memory: [mem 0xbb785000-0xbc9ddfff]
PM: Registered nosave memory: [mem 0xbc9de000-0xbca33fff]
PM: Registered nosave memory: [mem 0xbca35000-0xbcc3afff]
PM: Registered nosave memory: [mem 0xbd083000-0xbd7f3fff]
PM: Registered nosave memory: [mem 0xbd800000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
e820: [mem 0xbd800000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88023ec00000 s96728 r8192 d30248 u262144
pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2038437
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.1.0-1-amd64 root=/dev/mapper/luca-root ro quiet splash video=HDMI-A-1:1366x768-24@60
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
Memory: 7835408K/8283288K available (5612K kernel code, 1083K rwdata, 1892K rodata, 1264K init, 832K bss, 447880K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:1032 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3511.755 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7023.51 BogoMIPS (lpj=14047020)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150410
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
Freeing SMP alternatives memory: 24K (ffffffff81a4c000 - ffffffff81a52000)
ftrace: allocating 22690 entries in 89 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8320 Eight-Core Processor (fam: 15, model: 02, stepping: 00)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (56188.08 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xba977000-0xbb784fff] (14737408 bytes)
PM: Registering ACPI NVS region [mem 0xbca35000-0xbcc3afff] (2121728 bytes)
clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 2 blocks of module-level executable AML code
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [1002:5a19] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
pci 0000:00:09.0: System wakeup disabled by ACPI
pci 0000:00:0a.0: [1002:5a1d] type 01 class 0x060400
pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0a.0: System wakeup disabled by ACPI
pci 0000:00:0b.0: [1002:5a1f] type 01 class 0x060400
pci 0000:00:0b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0b.0: System wakeup disabled by ACPI
pci 0000:00:0d.0: [1002:5a1e] type 01 class 0x060400
pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0d.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.1: System wakeup disabled by ACPI
pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
pci 0000:00:15.2: supports D1 D2
pci 0000:00:15.2: System wakeup disabled by ACPI
pci 0000:00:15.3: [1002:43a3] type 01 class 0x060400
pci 0000:00:15.3: supports D1 D2
pci 0000:00:15.3: System wakeup disabled by ACPI
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff]
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:16.2: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:00.0: [1002:6811] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea3ffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D1 D2 D3hot
pci 0000:01:00.1: [1002:aab0] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:02:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:02:00.0: reg 0x10: [io 0xd050-0xd057]
pci 0000:02:00.0: reg 0x14: [io 0xd040-0xd043]
pci 0000:02:00.0: reg 0x18: [io 0xd030-0xd037]
pci 0000:02:00.0: reg 0x1c: [io 0xd020-0xd023]
pci 0000:02:00.0: reg 0x20: [io 0xd000-0xd01f]
pci 0000:02:00.0: reg 0x24: [mem 0xfe900000-0xfe9001ff]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:03:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:03:00.0: reg 0x10: [io 0xc050-0xc057]
pci 0000:03:00.0: reg 0x14: [io 0xc040-0xc043]
pci 0000:03:00.0: reg 0x18: [io 0xc030-0xc037]
pci 0000:03:00.0: reg 0x1c: [io 0xc020-0xc023]
pci 0000:03:00.0: reg 0x20: [io 0xc000-0xc01f]
pci 0000:03:00.0: reg 0x24: [mem 0xfe800000-0xfe8001ff]
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:04:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:04:00.0: reg 0x10: [mem 0xfe700000-0xfe707fff 64bit]
pci 0000:04:00.0: PME# supported from D3cold
pci 0000:00:09.0: PCI bridge to [bus 04]
pci 0000:00:09.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:0a.0: PCI bridge to [bus 05]
pci 0000:00:0b.0: PCI bridge to [bus 06]
pci 0000:00:0d.0: PCI bridge to [bus 07]
pci 0000:00:14.4: PCI bridge to [bus 08] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff window] (subtractive decode)
pci 0000:00:15.0: PCI bridge to [bus 09]
pci 0000:0a:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:0a:00.0: reg 0x10: [io 0xb000-0xb0ff]
pci 0000:0a:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit pref]
pci 0000:0a:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit pref]
pci 0000:0a:00.0: supports D1 D2
pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 0a]
pci 0000:00:15.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:0b:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:0b:00.0: reg 0x10: [mem 0xfe600000-0xfe607fff 64bit]
pci 0000:0b:00.0: PME# supported from D3cold
pci 0000:00:15.2: PCI bridge to [bus 0b]
pci 0000:00:15.2: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:0c:00.0: [1b21:1142] type 00 class 0x0c0330
pci 0000:0c:00.0: reg 0x10: [mem 0xfe500000-0xfe507fff 64bit]
pci 0000:0c:00.0: PME# supported from D3cold
pci 0000:00:15.3: PCI bridge to [bus 0c]
pci 0000:00:15.3: bridge window [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0xba533000-0xbbffffff]
e820: reserve RAM buffer [mem 0xbca35000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd083000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbd800000-0xbfffffff]
e820: reserve RAM buffer [mem 0x23f000000-0x23fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io 0x040b] has been reserved
system 00:01: [io 0x04d6] has been reserved
system 00:01: [io 0x0c00-0x0c01] has been reserved
system 00:01: [io 0x0c14] has been reserved
system 00:01: [io 0x0c50-0x0c51] has been reserved
system 00:01: [io 0x0c52] has been reserved
system 00:01: [io 0x0c6c] has been reserved
system 00:01: [io 0x0c6f] has been reserved
system 00:01: [io 0x0cd0-0x0cd1] has been reserved
system 00:01: [io 0x0cd2-0x0cd3] has been reserved
system 00:01: [io 0x0cd4-0x0cd5] has been reserved
system 00:01: [io 0x0cd6-0x0cd7] has been reserved
system 00:01: [io 0x0cd8-0x0cdf] has been reserved
system 00:01: [io 0x0800-0x089f] could not be reserved
system 00:01: [io 0x0b20-0x0b3f] has been reserved
system 00:01: [io 0x0900-0x090f] has been reserved
system 00:01: [io 0x0910-0x091f] has been reserved
system 00:01: [io 0xfe00-0xfefe] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
system 00:01: [mem 0xff800000-0xffffffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0290-0x02af] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:04: [io 0x04d0-0x04d1] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [dma 0 disabled]
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:07: [mem 0xfeb20000-0xfeb23fff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 9 devices
clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfea00000-0xfeafffff]
pci 0000:00:02.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfe900000-0xfe9fffff]
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:05.0: bridge window [mem 0xfe800000-0xfe8fffff]
pci 0000:00:09.0: PCI bridge to [bus 04]
pci 0000:00:09.0: bridge window [mem 0xfe700000-0xfe7fffff]
pci 0000:00:0a.0: PCI bridge to [bus 05]
pci 0000:00:0b.0: PCI bridge to [bus 06]
pci 0000:00:0d.0: PCI bridge to [bus 07]
pci 0000:00:14.4: PCI bridge to [bus 08]
pci 0000:00:15.0: PCI bridge to [bus 09]
pci 0000:00:15.1: PCI bridge to [bus 0a]
pci 0000:00:15.1: bridge window [io 0xb000-0xbfff]
pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
pci 0000:00:15.2: PCI bridge to [bus 0b]
pci 0000:00:15.2: bridge window [mem 0xfe600000-0xfe6fffff]
pci 0000:00:15.3: PCI bridge to [bus 0c]
pci 0000:00:15.3: bridge window [mem 0xfe500000-0xfe5fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff]
pci_bus 0000:08: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:08: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:08: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:08: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:08: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:08: resource 10 [mem 0xc0000000-0xffffffff window]
pci_bus 0000:0a: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:0a: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
pci_bus 0000:0b: resource 1 [mem 0xfe600000-0xfe6fffff]
pci_bus 0000:0c: resource 1 [mem 0xfe500000-0xfe5fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 26416K (ffff880034c58000 - ffff880036624000)
AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
AMD-Vi: Interrupt remapping enabled
AMD-Vi: Lazy IO/TLB flushing enabled
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa9422000-0xad422000] (64MB) mapped at [ffff8800a9422000-ffff8800ad421fff]
perf: AMD NB counters detected
microcode: CPU0: patch_level=0x06000822
microcode: CPU1: patch_level=0x06000822
microcode: CPU2: patch_level=0x06000822
microcode: CPU3: patch_level=0x06000822
microcode: CPU4: patch_level=0x06000822
microcode: CPU5: patch_level=0x06000822
microcode: CPU6: patch_level=0x06000822
microcode: CPU7: patch_level=0x06000822
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
simple-framebuffer simple-framebuffer.0: framebuffer at 0xc0000000, 0x300000 bytes, mapped to 0xffffc90001000000
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1024x768x32, linelength=4096
Console: switching to colour frame buffer device 128x48
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1441130895.080:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:03: setting system clock to 2015-09-01 18:08:16 UTC (1441130896)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1264K (ffffffff81910000 - ffffffff81a4c000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 520K (ffff88000177e000 - ffff880001800000)
Freeing unused kernel memory: 156K (ffff8800019d9000 - ffff880001a00000)
random: systemd-udevd urandom read with 2 bits of entropy available
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
wmi: Mapper loaded
SCSI subsystem initialized
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
libata version 3.00 loaded.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:0a:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:0a:00.0 eth0: RTL8168f/8111f at 0xffffc90000c6a000, 10:c3:7b:a2:a9:21, XID 08000800 IRQ 30
r8169 0000:0a:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[drm] Initialized drm 1.1.0 20060810
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.1.0-1-amd64 ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[drm] radeon kernel modesetting enabled.
checking generic (c0000000 300000) vs hw (c0000000 10000000)
fb: switching to radeondrmfb from simple
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (PITCAIRN 0x1002:0x6811 0x1462:0x2015).
[drm] register mmio base: 0xFEA00000
[drm] register mmio size: 262144
radeon 0000:01:00.0: Invalid ROM contents
ATOM BIOS: 113
radeon 0000:01:00.0: VRAM: 2048M 0x0000000000000000 - 0x000000007FFFFFFF (2048M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000080000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=2048M, BAR=256M
[drm] RAM width 256bits DDR
[TTM] Zone kernel: Available graphics memory: 4037624 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 2048M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading pitcairn Microcode
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/pitcairn_pfp.bin
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/pitcairn_me.bin
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/pitcairn_ce.bin
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/pitcairn_rlc.bin
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/pitcairn_mc.bin
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/pitcairn_smc.bin
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 1002:5a16 = 33ed02/0
[drm] radeon: dpm initialized
radeon 0000:01:00.0: firmware: direct-loading firmware radeon/TAHITI_uvd.bin
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] probing gen 2 caps for device 1002:5a16 = 33ed02/0
[drm] PCIE gen 2 link speeds already enabled
[drm] PCIE GART of 1024M enabled (table at 0x0000000000277000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000080000c00 and cpu addr 0xffff8802309cec00
radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 0x0000000080000c04 and cpu addr 0xffff8802309cec04
radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 0x0000000080000c08 and cpu addr 0xffff8802309cec08
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000080000c0c and cpu addr 0xffff8802309cec0c
radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 0x0000000080000c10 and cpu addr 0xffff8802309cec10
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000075a18 and cpu addr 0xffffc90001035a18
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
xhci_hcd 0000:04:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.1.0-1-amd64 xhci-hcd
usb usb2: SerialNumber: 0000:04:00.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
ehci-pci 0000:00:13.2: EHCI Host Controller
usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.1.0-1-amd64 xhci-hcd
usb usb3: SerialNumber: 0000:04:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 21, io mem 0xfeb07000
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: EHCI Host Controller
usb usb4: Manufacturer: Linux 4.1.0-1-amd64 ehci_hcd
usb usb4: SerialNumber: 0000:00:13.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
xhci_hcd 0000:0b:00.0: xHCI Host Controller
xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:0b:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 4.1.0-1-amd64 xhci-hcd
usb usb5: SerialNumber: 0000:0b:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:0b:00.0: xHCI Host Controller
xhci_hcd 0000:0b:00.0: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:16.2: EHCI Host Controller
ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:16.2: debug port 1
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 4.1.0-1-amd64 xhci-hcd
usb usb6: SerialNumber: 0000:0b:00.0
ehci-pci 0000:00:16.2: irq 23, io mem 0xfeb04000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: EHCI Host Controller
usb usb7: Manufacturer: Linux 4.1.0-1-amd64 ehci_hcd
usb usb7: SerialNumber: 0000:00:16.2
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 4 ports detected
xhci_hcd 0000:0c:00.0: xHCI Host Controller
xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 8
ahci 0000:00:11.0: version 3.0
ohci-pci: OHCI PCI platform driver
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 3 ports 6 Gbps 0x7 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 irq 19
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 9
ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
ahci 0000:02:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:02:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:02:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host3: ahci
scsi host4: ahci
ata4: SATA max UDMA/133 abar m512@0xfe900000 port 0xfe900100 irq 50
ata5: SATA max UDMA/133 abar m512@0xfe900000 port 0xfe900180 irq 50
ahci 0000:03:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi host5: ahci
scsi host6: ahci
ata6: SATA max UDMA/133 abar m512@0xfe800000 port 0xfe800100 irq 52
ata7: SATA max UDMA/133 abar m512@0xfe800000 port 0xfe800180 irq 52
usb usb9: New USB device found, idVendor=1d6b, idProduct=0001
usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb9: Product: OHCI PCI host controller
usb usb9: Manufacturer: Linux 4.1.0-1-amd64 ohci_hcd
usb usb9: SerialNumber: 0000:00:12.0
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 5 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 10
ohci-pci 0000:00:13.0: irq 20, io mem 0xfeb08000
xhci_hcd 0000:0c:00.0: hcc params 0x0200e081 hci version 0x100 quirks 0x00000010
usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: xHCI Host Controller
usb usb8: Manufacturer: Linux 4.1.0-1-amd64 xhci-hcd
usb usb8: SerialNumber: 0000:0c:00.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
xhci_hcd 0000:0c:00.0: xHCI Host Controller
xhci_hcd 0000:0c:00.0: new USB bus registered, assigned bus number 11
usb usb11: New USB device found, idVendor=1d6b, idProduct=0003
usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb11: Product: xHCI Host Controller
usb usb11: Manufacturer: Linux 4.1.0-1-amd64 xhci-hcd
usb usb11: SerialNumber: 0000:0c:00.0
hub 11-0:1.0: USB hub found
hub 11-0:1.0: 2 ports detected
[drm] ring test on 0 succeeded in 3 usecs
[drm] ring test on 1 succeeded in 1 usecs
[drm] ring test on 2 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 6 usecs
[drm] ring test on 4 succeeded in 6 usecs
usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb10: Product: OHCI PCI host controller
usb usb10: Manufacturer: Linux 4.1.0-1-amd64 ohci_hcd
usb usb10: SerialNumber: 0000:00:13.0
hub 10-0:1.0: USB hub found
hub 10-0:1.0: 5 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 12
ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
usb usb12: New USB device found, idVendor=1d6b, idProduct=0001
usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb12: Product: OHCI PCI host controller
usb usb12: Manufacturer: Linux 4.1.0-1-amd64 ohci_hcd
usb usb12: SerialNumber: 0000:00:14.5
hub 12-0:1.0: USB hub found
hub 12-0:1.0: 2 ports detected
ohci-pci 0000:00:16.0: OHCI PCI host controller
ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 13
ohci-pci 0000:00:16.0: irq 22, io mem 0xfeb05000
usb usb13: New USB device found, idVendor=1d6b, idProduct=0001
usb usb13: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb13: Product: OHCI PCI host controller
usb usb13: Manufacturer: Linux 4.1.0-1-amd64 ohci_hcd
usb usb13: SerialNumber: 0000:00:16.0
hub 13-0:1.0: USB hub found
hub 13-0:1.0: 4 ports detected
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
usb 2-1: new low-speed USB device number 2 using xhci_hcd
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 5-1: new full-speed USB device number 2 using xhci_hcd
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: WDC WD10EZEX-60M2NA0, 01.01A01, max UDMA/100
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA WDC WD10EZEX-60M 1A01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
ata3.00: ATAPI: ASUS DRW-24F1ST a, 1.00, max UDMA/100
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: configured for UDMA/100
usb 2-1: New USB device found, idVendor=093a, idProduct=2521
usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1: Product: USB OPTICAL MOUSE
usb 2-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:09.0/0000:04:00.0/usb2/2-1/2-1:1.0/0003:093A:2521.0001/input/input4
hid-generic 0003:093A:2521.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0000:04:00.0-1/input0
ata2.00: ATA-7: ST380811AS, 3.AAE, max UDMA/133
ata2.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST380811AS E PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: CD-ROM ASUS DRW-24F1ST a 1.00 PQ: 0 ANSI: 5
sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 2:0:0:0: Attached scsi CD-ROM sr0
usb 5-1: New USB device found, idVendor=0a12, idProduct=0001
usb 5-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 5-1: Product: CSR8510 A10
usb 2-2: new low-speed USB device number 3 using xhci_hcd
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3511.829 MHz
clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x329ef7d2c7e, max_idle_ns: 440795359034 ns
usb 2-2: New USB device found, idVendor=258a, idProduct=0001
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: USB KEYBOARD
usb 2-2: Manufacturer: SINO WEALTH
usb 2-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 2-2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:09.0/0000:04:00.0/usb2/2-2/2-2:1.0/0003:258A:0001.0002/input/input5
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD4
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD5
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-I-1
[drm] HPD6
[drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 3:
[drm] DVI-D-1
[drm] HPD1
[drm] DDC: 0x6570 0x6570 0x6574 0x6574 0x6578 0x6578 0x657c 0x657c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY1
ata5: SATA link down (SStatus 0 SControl 300)
hid-generic 0003:258A:0001.0002: input,hidraw1: USB HID v1.10 Keyboard [SINO WEALTH USB KEYBOARD] on usb-0000:04:00.0-2/input0
input: SINO WEALTH USB KEYBOARD as /devices/pci0000:00/0000:00:09.0/0000:04:00.0/usb2/2-2/2-2:1.1/0003:258A:0001.0003/input/input6
[drm] fb mappable at 0xC0479000
[drm] vram apper at 0xC0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
hid-generic 0003:258A:0001.0003: input,hiddev0,hidraw2: USB HID v1.10 Device [SINO WEALTH USB KEYBOARD] on usb-0000:04:00.0-2/input1
[drm] Initialized radeon 2.42.0 20080528 for 0000:01:00.0 on minor 0
ata7: SATA link down (SStatus 0 SControl 300)
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
PM: Starting manual resume from disk
PM: Hibernation image partition 254:1 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
Switched to clocksource tsc
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice Root Slice.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Created slice System Slice.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Reached target Slices.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Mounting Debug File System...
systemd[1]: Created slice system-postgresql.slice.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Starting Create Static Device Nodes in /dev...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Started Increase datagram queue length.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Started LVM2 metadata daemon.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Journal Service.
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
systemd-journald[288]: Received request to flush runtime journal from PID 1
piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x42
sp5100_tco: Using 0xfed80b00 for watchdog MMIO address
sp5100_tco: Last reboot was not triggered by watchdog.
sp5100_tco: initialized (0xffffc90000c70b00). heartbeat=60 sec (nowayout=0)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sr 2:0:0:0: Attached scsi generic sg2 type 5
ACPI: acpi_idle registered with cpuidle
acpi-cpufreq: overriding BIOS provided _PSD data
EDAC MC: Ver: 3.0.0
EFI Variables Facility v0.08 2004-May-17
pstore: Registered efi as persistent store backend
MCE: In-kernel MCE decoding enabled.
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
input: PC Speaker as /devices/platform/pcspkr/input/input8
asus_wmi: ASUS WMI generic driver loaded
asus_wmi: Initialization: 0x0
asus_wmi: BIOS WMI version: 0.9
asus_wmi: SFUN value: 0x0
input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input9
asus_wmi: Disabling ACPI video driver
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: Force to non-snoop mode
alg: No test for crc32 (crc32-pclmul)
snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input16
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input17
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input18
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input19
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input20
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input21
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input22
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input23
snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
Adding 4194300k swap on /dev/mapper/luca-swap. Priority:-1 extents:1 across:4194300k FS
snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
ata1.00: request sense
ata1.00: sense data 05/26/02
ata1.00: request sense
ata1.00: sense data 05/26/02
snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
ata1.00: request sense
ata1.00: sense data 05/26/02
snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker allocation for ELD
ata1.00: request sense
ata1.00: sense data 05/26/02
FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:0a:00.0: firmware: failed to load rtl_nic/rtl8168f-1.fw (-2)
r8169 0000:0a:00.0: Direct firmware load for rtl_nic/rtl8168f-1.fw failed with error -2
r8169 0000:0a:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168f-1.fw (-2)
r8169 0000:0a:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:0a:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ip_tables: (C) 2000-2006 Netfilter Core Team
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
fuse init (API version 7.23)